Planned a kitchen in Prefab Planner? Export a backup from that app and open it here. The walls, appliances and box widths come across; heights and depths do not — every cabinet is sized from your own finished counter height and countertop thickness. Filler strips are counted but never built as cabinets.
Single cabinet — cut list + bid ready in minutes. No room setup needed.
Enter what it really took. The app works the profit out backwards from the price you quoted — and tells you your real hours per foot, which is the number every estimate here is guessing at.
Add your first room above.
Then add cabinets and openings to each room.
Save common room layouts as templates to reuse across jobs.
Tap a status badge to advance it through Quoted → Approved → In Progress → Complete.
Guillotine cut layout for ¾" plywood box panels & drawer boxes — one diagram per sheet, numbered to match the cut sequence below it. Verify all measurements before cutting.
Takes one cabinet's cut list and builds the cabinet back out of those pieces alone — then measures it against the design. It is never shown the designed width, which is what makes the comparison worth anything.
Mark knot zones on your actual boards, or flag a category as all-clear. Write each board's number on the physical board as you go.
Real cut-list pieces packed onto your mapped boards — least waste, knots avoided. Planning tool only — does not change the quoted job cost.